Macintosh ® Software Setup - Lexicon OMEGA - MANUAL 2 Owner's Manual

Macintosh Software Setup
MACINTOSh
You must consult the Software Installation Guide packaged with the software CD-ROM
inside the Omega box to ensure the successful installation of the recording software
and USB setup.
If you haven't already installed the Cubase LE4 and Lexicon Pantheon plug-in soft-
ware, please do so before continuing on to the next section.
MAC OS
A USB device must initialize itself with the host computer to operate correctly. The
Omega Studio comprises several devices (audio and MIDI) and each of those must be
initialized. Some Apple
Omega Studio is powered on (and connected to the USB port) before the computer is
turned on. The simplest way to avoid problems is to either turn on the Omega Studio
or connect it to the USB port after the computer is booted. However, there is a way to
force a reinitialization after the computer is running.
1. Make sure you close any applications which are using the Omega Studio.
2. Press the Mic 1-2 USB Assign button and the Line 3-4 USB Assign button at the
®
®
same time and then release them simultaneously. The blue USB light will flash
and after three seconds the Omega Studio will be properly initialized.
16
SOFTWARE SETUP
Mac computers will not recognize all of these devices if the