Windows ® Vista And Xp Software Setup - Lexicon OMEGA - MANUAL 2 Owner's Manual

OMEGA
™
USING CUbASE lE4 WITh ThE
lExICON OMEGA STUdIO
®
WINdOWS vISTA ANd xP SOFTWARE SETUP
1. Start Cubase LE4. The first time you use
Cubase LE4 with the Lexicon Omega Studio
you may be asked to run the Multimedia
test as shown below. Select
2. Cubase LE4 will display the following warning
that configuration has not been tested.
Click .
OK
3. Once you are into Cubase,
go to
DEvICES>DEvICE SETUP
4. Under , click on
DEvICES
if it is not already selected. Click on
You are now ready to begin recording using your Omega Studio and Cubase LE4.
Using Cubase LE4 with the Lexicon Omega Studio
.
NO
.
and select
vST MULTITRACK
to switch the driver and click
SWITCH
LEXICON USB ASIO
.
OK
15