Product Overview; The Front Panel - Lexicon MPX 1 - REV User Manual

Options
LED lights to indicate additional options exist for the
displayed parameter. Press to access options. (LED will
Input/Output
flash while options are displayed.) Press again to exit.
Adjust analog input
In Program mode, accesses database sorting selection.
and output level.
Effect Select: Pitch, Chorus, EQ, Mod, Delay, Reverb
Buttons light to indicate effect is active. In Program mode,
pressing button turns off LED and bypasses effect. In Edit
mode, pressing button selects effect parameters for editing.
Tap
When Tempo LED is flashing, sets tempo.
Press twice in rhythm to establish tempo
rate. Press once to reset LFO.
Display
Digital In LED lights to indicate presence of digital
input. The Clock LED lights to indicate digital signal
lock. The MIDI LED lights to indicate incoming or
outgoing MIDI data.
3-Digit Display indicates ID number of currently
loaded program or patch.
6-position headroom indicator shows analog and
digital signal levels and overload conditions.
Two rows of 16 characters display program and
effect names, parameter names and values, and
help and alert messages. An edit indicator shows
edited effects.
Tempo LED flashes in time with current tempo rate
when Tap is active.
A/B LEDs light to indicate A/B function is active.
A/B
Activates a variable
glide between patched
parameters.
Patch
Accesses patch
parameters.
Mix
Bypass
Instant access to mix
Bypasses currently
and level parameters
loaded program.
of any effect in the
current program.
Value, Knob and < >
In Program mode, the knob selects programs, <and > jump through program
categories. Pressing Value displays the Soft Row parameters of the cur-
rently loaded program. When Value is lit, the knob adjusts the value of the
displayed parameter, < and > select other Soft Row parameters.
In Edit and System modes, Value assigns Select and Adjust functions to the
knob or to the < > buttons. When Value is lit, the < > buttons select a
parameter for modification and the knob adjusts the displayed parameter's
value. When Value is off (unlit), the knob selects and the buttons adjust.

Product Overview

Product Overview

The Front Panel

Program*
Activates Program Mode where you can select
and load programs, see which effects are active
in any program, and access a special set of soft
parameters for the current program.
*In Autoload, displayed programs load automatically.
In Manual mode, press Program to load any dis-
played program.
Edit
Activates Edit mode, for access to all
parameters of the currently loaded effect.
Store
Initiates program
store function.
System
Activates System mode
parameters such as auto or
manual load, MIDI dumps,
I/O configuration, etc.
1
Power
On/Off.
1-1