Lexicon LDI 12T User Manual page 65

Lexicon Studio 12T System User Guide
7. Deactivate the Write function by clicking on the button.
8. Exiting the Monitor window will automatically deactivate the Write function.
Recording Mixer settings in Stop mode
The Write function works in Stop mode as well as during playback. If you activate Write when Cubase
VST is stopped, all changes you make to your mixer parameters are recorded at the current Song
Position. This feature can be used creatively if you need initial mixer settings, abrupt changes, etc.
Undoing your recording
If you select Undo from the Edit menu, all actions recorded since you last activated Write will be
undone. Therefore, make it a habit to always deactivate Write after each recording "pass" and listen
to what you recorded.
• If you find this too cumbersome, you can make separate Audiomix Parts for the different audio
channels or recording "passes", and edit/delete these afterwards.
Playing back your recorded Mixer actions
1. Check that the Audiomix Track or Part are not muted.
2. Activate the Automated playback by clicking on the Read button in the upper left corner of the
Monitor window.
You may have Write and Read activated simultaneously, if you want to watch and listen to your
recorded mixer actions while you're recording fader movements for another mixer channel, etc.
3. Start playback as usual. The monitor faders and controls will move automatically, following your
recorded actions.
Appendix A
A-5
5