Loading Effects; Editing Effects - Lexicon LDI 12T User Manual

Using the PC-90

Loading Effects

Load effects from disk into the PC-90 as follows:
1. Pull down the File menu.
2. To load a single Program, select Load Effect.
3. To load a complete Program Bank, select Load Bank.
4. In the file dialog that appears, find and click on the file you want to load.
The Effect settings are saved with your Song. If you want to use your edited effects in other Songs,
you can save and load them separately.

Editing Effects

You can create your own programs or edit any of the presets with the editor. To open the PC-90
interface, click the Edit button on the PC-90 Rack Xpander. The PC-90 Interface will open.
1. Click on the PARA button, to activate a display of three parameters. The parameter currently
selected for editing is displayed with a border.
2. If the parameter you want to edit is not visible in the display, click on the left or right part of the
Page button to go to another parameter page. To return to Parameter mode, click on the Para.
button again.
3. Set a value for the selected parameter with the Value dial. To make small adjustments, click on
the dial, hold down the mouse button and move the pointer away from the dial before turning it.
The further away from the dial the pointer is, the finer the value adjustments.
4. Use the INC and DEC buttons for super fine manipulation of the active parameter.
34
34
Lexicon