Install The Core-32/Pc-90 Assemby - Lexicon LDI 12T User Manual

Installation
Install the Core-32/PC-90 assembly
The Core-32 System card must be installed in a full-size PCI slot which is a bus master. Refer to your
computer owner's manual to determine which slots are available as bus masters. (On some older
motherboards, the PCI slot next to the ISA bus connector [the PCI/ISA shared slot] is not a PCI bus
master slot.)
1. Touch the computer power supply case to discharge personal static.
2. Pick up the Core-32/PC-90 assembly by the top of the metal bracket and the top of the other end
of the card.
3. Align the card assembly over the slot you've chosen and insert it.
4. Place one hand along the top edge of the card and push down firmly until the card is fully seated
in the slot. Do not use excessive force.
5. Once the card is fully seated, attach the Core-32 bracket to the computer chassis with the screws
provided with your computer. If you are standing the computer up, check to see that boards are
not bending and shorting against each other.
6. Replace the cover on the computer. Do not operate the system without the cover.
8
8
Lexicon