Network And Power Connections - D-Link DCS-6511 User Manual

Hd day & night vandal-proof fixed dome network camera
Hide thumbs Also See for DCS-6511:
Table of Contents

Advertisement

Section 2 - Installation
General Connection Using 12 V DC Power Adapter
1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power outlet.
General Connection Using 24 V AC Power Wiring
1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power source such as
your building's emergency power.
Connection with a PoE Hub
If you are using a PoE hub, connect the IP camera to the hub via an Ethernet
cable, which will provide transmission of both power and data over a single
cable.
D-Link DCS-6511 User Manual

Network and Power Connections

20

Advertisement

Table of Contents
loading

Table of Contents