Adjusting The Viewing Angle - D-Link DCS-6511 User Manual

Section 2 - Installation

Adjusting the Viewing Angle

Adjust the Viewing Angle of the 3-Axis Mechanism
Turn the lens module left and right until the desired position is achieved; tighten the pan
screw once completed.
Loosen the tilt screws on both sides of the camera, and turn the lens module up and down
until the desired position is achieved; tighten the tilt screws once completed.
Turn the lens to adjust the IP camera's image until the desired orientation is achieved. Tighten
the image adjustment screw once completed.
D-Link DCS-6511 User Manual 11