Network Setup - D-Link DCS-4703E User Manual

Section 3: Configuration
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After making any
changes, click the Save Settings button to save your changes.
LAN Settings: This section lets you configure settings for your local area network.
DHCP: Select this connection if you have a DHCP server running on your network
and would like your camera to obtain an IP address automatically.
If you choose DHCP, you do not need to fill out the IP address settings.
Static IP Client:
You may obtain a static or fixed IP address and other network information
from your network administrator for your camera.
IPv4 Address: Enter the IP address that the camera will use on your
network. You may need to get this information from your ISP or network
administrator.
Subnet Mask: The default value is "255.255.255.0. " Used to determine if the
destination is part of the same subnet.
Default Router: The router used to forward frames to destinations
in a different subnet. Invalid router settings may cause the failure of
transmissions to a different subnet.
Optional Primary DNS: Primary domain name server that translates names
to IP addresses.
Optional Secondary DNS: Secondary domain name server to backup the
Primary DNS.
Enable UPnP
Enabling this setting allows your camera to be configured as a UPnP device
Presentation: on your network.
D-Link DCS-4703E User Manual

Network Setup

25