Add Recording - D-Link DCS-6511 User Manual

Section 3 - Configuration
Here you can configure and schedule the recording settings.
Recording entry
The unique name of the entry.
name:
Enable this
Select this to enable the recording function.
recording:
Priority:
Set the priority for this entry. The entry with a higher priority value
will be executed first.
Source:
The source of the stream.
Recording
Scheduling the recording entry.
schedule:
Recording settings:
Configuring the setting for the recording.
Destination:
Select the folder where the recording file will be stored.
Total cycling
Please input a volume size between 1MB and 200GB for recording space. The recording data will replace the oldest record
recording size:
when the total recording size exceeds this value. For example, if each recording file is 6MB, and the total cyclic recording size
is 600MB, then the camera will record 100 files in the specified location (folder) and then will delete the oldest file and create
new file for cyclic recording.
Please note that if there is not enough free space, the recording will stop. Before you set up this option please make sure that
sufficient free space is available. It is better to not save other files in the same folder as recordings.
Size of each file for File size for each recording file. You may input the value in the range of 200-5000.
recording:
File Name Prefix: The prefix name will be added on the file name of the recording file(s).
D-Link DCS-6511 User Manual

Add Recording

52