Admin Cannot List And Map Domain Users And Groups For Sfu Mapping Unless The Sfu Admin Is Logged Into The Domain; Password Synchronization Will Not Work Correctly On A Domain Controller Without An Admin Ui - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Release Note

Release Notes
Take only the NFS share that you want to edit offline and then
change parameters.
1. Select Cluster Management from the WebUI.
2. Click Resources.
3. Click the radio button for the NFS resource being edited.
4. Click Take Offline.
5. Return to the Resources page and click the radio button for
the NFS resource being edited.
6. Click Parameters from the NFS resource properties page.
7. Edit the parameters and click OK.
8. Using Cluster Management in the WebUI, turn the NFS
resource to online.
Admin cannot list and map domain users and
groups for SFU mapping unless the SFU admin
is logged into the domain
The administator must log into the domain before mapping
domain users and groups. If the admin is not logged into the
domain, the domain user or group is not on the list of Windows
users or groups and cannot be mapped.
Password Synchronization will not work
correctly on a Domain Controller without an
Admin UI
The sfucustom.msi file located on the StorageWorks NAS E7000
at c:\SFU does not install an Admin UI for password
synchronization on a DC.
The Admin UI is used to set up:
•= Direction of password synchronization
8 StorageWorks by Compaq NAS Exectutor E7000 Release Notes