Disconnected Client Telnet Session Can Cause The Sfu Gui To Hang - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Release Note

Release Notes
To install NFS Authentication Tools on the DC by itself (no Password
Synchronization),Use the instructions outlined in the E7000
Administration Guide.
To install NFS Authentication Tools and Password
Synchronization on the DC:
1. Allow the c:\WINNT\bin\SFU directory of the E7000 to be
shared.
net share SFU=C:\WINNT\bin\SFU
2. On the DC, connect to the share.
net use Z: \\NAS_machine_name\SFU
3. Change directories from the DC to the root of the connected
E7000 share.
cd /d Z:\
4. Run the install programs on the DC in the following order.
a.
b.
5. Reboot the DC. The DC must be rebooted manually after
installing the password synchronization piece to run
correctly.
Disconnected Client Telnet Session can cause
the SFU GUI to hang
If a client Telnet session is forcibly disconnected from the E7000
while the SFU GUI is open, the SFU GUI can hang and become
unusable. To get around this, stop the SFU GUI on the E7000
using Task Manager and reopen the SFU GUI.
10 StorageWorks by Compaq NAS Exectutor E7000 Release Notes
OemSetup.msi ADDLOCAL=NFSServerAuth
SFUDIR=c:\SFU OEMINSTALL=TRUE
SOURCELIST=Z:\ /l*v %temp%\sfusetup.log /q
OemSetup.msi ADDLOCAL=PasswdSync
SFUDIR=c:\SFU OEMINSTALL=TRUE
SOURCELIST=Z:\ /l*v %temp%\sfusetup.log /q