Support For Enterprise Virtual Array; Cluster Agent Activation - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Release Note

Release Notes
To work around this, the administrator must delete all the
LUNs created with the ACS 8.5 firmware, then re-create
them using the ACS 8.6-1 firmware.
2. Using SecurePath 3.1A, fibre channel arbitrated loop
(FCAL), and ACS 8.6-1 firmware, LUNs cannot be
numbered higher than 63. LUNs D0 through D63 are
available for use, but LUNs D64 through D99 are not.

Support For Enterprise Virtual Array

To use Enterprise Virtual Array storage with the NAS Executor
E7000, you must download a softpaq and solutions paper from
www.compaq.com/products/storageworks/e7000/index.html
The softpaq includes updated support software for the Enterprise
Virtual Array;the solution paper describes how to install the
update, and details best practices for using the Enterprise Virtual
Array with the StorageWorks NAS Executor E7000.
After installing the SoftPaq, return to the SAN Connection
Wizard and finish the initialization.

Cluster Agent Activation

If the StorageWorks NAS Executor E7000 server is part of a
cluster, the Compaq Insight Manager Cluster Agent must be
activated. The Cluster Agent allows administrators to monitor
the state of the cluster and the cluster resources from Compaq
Insight Manager.
To activate the agent click Start->Settings->Control Panel-
>Compaq Management Agents and add the clustering agent to
the active agent list.
18 StorageWorks by Compaq NAS Exectutor E7000 Release Notes