Denon DN-2100F Operating Instructions Manual page 16

ENGLISH
Stuttering
Stuttering is possible only when the seamless loop mode is off
and the A1 or A2 points have been loaded.
In the stutter mode, press the A-1 (or A-2) button.
• Playback starts immediately from the start point (A) when
the button is pressed and stops when the button is
released.
1
• "STR" indicator lights.
When the PLAY/PAUSE button is pressed in the above
mode, playback begins immediatley from that start point
(A).
NOTE:
• When the "
LOCK
the pause mode or to use the manual search and scan
functions.
16
" indicator is lit, it is not possible to set
(2) Digital scratch
Using the scratch function
This can be operated when the digital scratch mode is selected in
the preset mode.
Set the ASP to the scratch mode. (The Digi-S led starts
1
flashing)
• Refer to "Preset function" on page 19.
Check that it is possible to start scratching.
Press the PLAY/PAUSE button.
2
PLAY/PAUSE
• If the " " indicator is lit, scratching is possible.
GO!
The DIGI-S LED lights when scratching is performed
3
once.
Change the playing speed and direction of playback.
Turn the Jog wheel.
The disc is played in the forward direction
ARCH SCAN
I
when the jog wheel is turned clockwise, in
the reverse direction when the jog wheel is
turned counterclockwise.
The playing speed changes according to
4
the speed at which the jog wheel is turned.
• When the scratch operation is performed during normal
playback, normal playback resumes once scratching is
stopped.
• If the scratch operation is performed in the pause mode,
the pause mode is set once scratching is stopped.
GO!
Lit