Table Of Contents; Main Features; Connections/Installation - Denon DN-2100F Operating Instructions Manual

Denon double cd player operating instructions
Table of Contents

Advertisement

z
Main features ...............................................................................7
x
Connections/Installation ...............................................................7
c
Part names and functions ....................................................8 ~ 10
v
Compact discs............................................................................11
b
Basic operation...........................................................................12
n
Pitch/Brake/Platter/Key adjust ....................................................13
• ACCESSORIES
Check that the following parts are included in addition to the main unit:
q Operating instructions ...................................................1
w Connection cords for signal output (RCA) ...........................2

1 MAIN FEATURES

The DN-2100F is a double CD player equipped with a variety of
functions and high performance characteristics. Use it for example
for DJ mixing and remixing.
Control section
1. The DN-2100F can be easily mounted on a standard 19-inch
rack.
2. Improved visibility under low lighting conditions thanks to a
large fluorescent display, back-lit illuminated action buttons
and illuminated disc trays.
3. Improved interface operation thanks to a large jog/Shuttle
wheel and track select knob.
Functions
1. Shockproof function protecting against external vibrations
2. Auto Level Search / Instant Start
3. Pitch Bend (Button & Jog)
4. Seamless Loop
Playback can be looped between any two points in a track without
any break in the audio. Two loop start points (A-1 and A-2) can be
set anywhere within the track or disc.
5. Hot Start / Stutter
Playback can be started instantaneously from points A-1 and A-2.
In the stutter mode, these same buttons play momentary audio
while pressed and held down.
6. Digital-Scratch
This exclusive function emulates vinyl turntable scratching in real
time.

2 CONNECTIONS/INSTALLATION

1. Turn off the POWER switch.
2. Connect the RCA pin cords to the inputs on your mixer.
3. Connect the control cord to the REMOTE connector on the RC-48.
CAUTION:
• Be sure to use the supplied control cord. Using another type of
cable may result in damage.
• Be sure the power is off when connecting the control cord.
Otherwise the units may not work properly.
• Never connect any remote controllers other than the RC-48.
Doing so can damage the equipment.

- TABLE OF CONTENTS -

m
Digital scratch ....................................................................14 ~ 16
,
Other functions ..........................................................................17
.
Preset functions and operations...........................................18, 19
⁄0
Cleaning the optical pick-up lens ................................................20
⁄1
Specifications .............................................................................20
e Remote control unit (RC-48) .............................................1
r Remote control connection cable ....................................1
17. Brake / Plat-S
In Brake mode, the playing speed comes to a quick halt,
simulating the STOP function on a vinyl turntable. In Plat-S
mode, it simulates a vinyl turntable's dragging sound when it's
power has been purposely turned OFF or ON.
18. Key Adjust
The key can be adjusted automatically when the playback pitch
is changed so that the key (vocal) remains the same regardless
of the pitch change.
19. Relay Play
When this mode is set, CD1 and CD2 starts playback alternately.
This unit can relay the playback of CD1 and CD2 every track or
every disc.
10. Power on Play
The player can be set so that playback in the relay mode starts
when the power is turned on.
11. Fader Start
Up to 4 loaded Hot Starts can be triggered hands free with any
compatible 5 volt pulse mixer by using the crossfader.
12. Auto Sleep Mode / Auto Disc Tray Close System
13. Preset functions - Different presets can be changed
according to your needs.
14. EXTRA REMOTE
Wireless control is possible using the Denon RC-8000 and RC-
8001ST.
DN-2100F
15
The DN-2100F will work normally when
the player unit is mounted within 15
degrees off the vertical plane at the front
panel. If the unit is tilted excessively, the
disc may not be loaded or unloaded
properly.
ENGLISH
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents