Lexicon 300 - V3.0 REV 1 Owner's Manual page 97

# Name
P143 *Stereo Shift
P144 Octave Down
P145 Vox Chorus
P146 Pole Flange
P147 Bulkie Roll
P148 Heavy Roll
P149 Going, Going
P150 Zorch!
Algorithm
Stereo Pitch Shift Straight ahead stereo pitch shifting with the Soft knob attached to the
Glide parameter. The stored value of the Soft knob is 55 which, when
turned negatively to zero, will yield an output 2 octaves down; when
turned all the way up, will give an output 1 octave above unison.
Stereo Pitch Shift Just like the name sez..
Stereo Pitch Shift This preset is configured with different preset values of pitch shift for left
and right: down 23 cents on the left and down 43 cents on the right.
There are also different delays for the left and right with small amounts
of feedback for each. Whip this one on either the lead vocal or BG Vox.
Stereo Pitch Shift Similar to a "Barber Pole" type flange. Mix 50/50 between source and
returns.
Stereo Pitch Shift Fluffy-sounding chorus effect. Mode is set to Mono so you can
independently pitch left or right. When sent to the 300 pre-fader, the
return audio has a slow motion movement around the stereo field.
Stereo Pitch Shift Another independent left/right preset except much stronger amounts of
shift between the two channels. Don't use this on anything pretty, make
the nasty... nastier.
Stereo Pitch Shift Up, Up, Up....in whole steps. The Soft knob is patched to the delay,
which you adjust to suit your taste.
Stereo Pitch Shift Up and down with delays and feedback. Nightmare audio.
Description
The Presets
5-5