Lexicon 300 - V3.0 REV 1 Owner's Manual page 154

Balanced female XLR digital input; Balanced male XLR digital output
Input/output levels and impedance comply with CCITT V.11 and EIA RS-422A.
Unbalanced coaxial "RCA" type digital input and output; SPDIF compatible
Balanced female XLR, EIA-422 input, 100mV p-p minimum. Formats supported::
5-pin DIN connectors provided for MIDI IN, MIDI OUT, and MIDI THRU
19.0"W x3.5"H x13.6"D (483x89x346mm) 19" rack mount standard, 2U high
Level
8 soft buttons for
parameter selection
and adjustment
Specifications subject to change without notice.
48kHz sample rate: 10Hz tp 21.5kHz, +0.2dB
80dB maximum, 10Hz to 20kHz
0.01% maximum, 10Hz to 20kHz
Conforms to AES 3-1992 (ANSI S4.40-1992).
Both input and output are transformer-coupled.
Optical (fiber optic) type digital input and output
Master: 48kHz+5Hz
44.1 kHz +5Hz
SMPTE
(Drop or Non-drop)
EBU
Film
Shipping weight: 24.5 lbs (11.1 kg)
100/120/220/240 VAC (-10%, +5%) 50-60 Hz
Operating Temperature: 32 to 95 F (0 to 35 C)
Storage Temperature: -22 to 167 F (-30 to 75 C)
Humidity: 95% max without condensation
Two lines of 20 alphanumeric characters each
Soft Knob
Numeric Keypad
for data entry
Edit Keypad
90dB minimum, A-weighted
0.01% maximum
90dB minimum
Slave: 42 kHz to 50kHz
Speed Range
0.75 to 1.18
0.80 to 1.33
0.82 to 1.33
Net weight:18.9 lbs (8.6 kg)
3-pin IEC power connector
75 VA maximum
Bypass A and B
Power Switch
CLA approval
Specifications
Analog Input to Analog
Output (48kHz sampling rate)
Frequency Response
Crosstalk
Signal-to-Noise Ratio
Total Harmonic Distortion
SMPTE Intermodulation
Distortion
Dynamic Range
Digital Audio Interfaces
AES/EBU
professional digital
audio interface
EIAJ CP-340/SPDIF
consumer digital
audio interface
Sample Frequency
Control Interfaces
Time Code Input
MIDI Interface
General
Dimensions
Weight
Power Requirements
Power Consumption
Environment
Front Panel Display
Front Panel Controls
Safety Approvals
10-3