Overview Of The 300 Display - Lexicon 300 - V3.0 REV 1 Owner's Manual

300 V 3.0 Owner's Manual
Overview of the
300 Display
SETUP
SELECT
MACH
STORE
VALUE
2-6
Generally, the display will indicate a page of parameters, any of which can be
selected by pressing the button directly above or below it. In the example below,
the "RTIM" parameter has been selected and is highlighted by an underscore
cursor on the display.
Once selected, parameters can be adjusted over their entire range with the Soft
knob. The parameter and its current value will appear on the display as long as
the Soft knob is being adjusted.
Pressing the front panel VALUE key will display all of the current parameter
CONTROL
values for the selected page. in this example, pressing VALUE will cause the
following display to appear:
SETUP
EDIT
EFFECT
EDIT
MOD
EDIT
Here again, turning the Soft knob will adjust the selected parameter over its
entire range; the buttons will select other parameters for adjustment.
The PAGE UP and PAGE DOWN keys are used to access various pages of
PAGE
additional parameters (or parameter values) which can then be edited via the
UP
Soft knob.
PAGE
DOWN
RTIM SIZE
RLVL TDCY
LEVEL
2.0s 37.1M
FULL 3.6k
ROLL PDLY
BASS XOVR
2.9k 22m
2 X 0.5k
Lexicon