Frequency Navigation On The Sub Band (Vfo-B) - Yaesu PCC-2000 Reference Book

PCC-2000 R
F
REQUENCY
[ SUB VFO-B ] K
NOB
Click the left mouse button on the [ A/B ] button to enable the
[ SUB VFO-B ] knob. Bring the mouse cursor to the [ SUB
VFO-B ] knob, then turn the mouse scroll to tune the Sub
Band (VFO-B) frequency.
Click the left mouse button on the [ A/B ] button to enabling
the [ SUB VFO-B ] knob. Press and hold in the left mouse
button on the edge of the [ SUB VFO-B ] knob, then rotate
the mouse, to tune the Sub Band (VFO-B) frequency while
holding in the left mouse button.
D F D
IRECT REQUENCY IGIT
1. Click the left mouse button on the frequency digit which you
wish to change on the Sub Band (VFO-B) frequency. The
frequency digit will change to Orange.
2. Turn the mouse scroll to tune the frequency digit of the Sub
Band (VFO-B) frequency.
B C
AND HANGE
Click the left mouse button on the [ B ] button, then click the left
mouse button on the [ BAND ] button corresponding to the Ama-
teur band on which you wish to operate.
D K F
IRECT EYPAD REQUENCY
1. Click the left mouse button on the [ B ] button, then click the
left mouse button on the [ ENT ] button of the BAND keys.
The "VFO SET" window will open.
2. Enter a frequency directly by the BAND keys or computer's
keyboard. Available entry values are 30000 - 60000000 (300
Hz - 60 MHz).
3. Click the left mouse button on the [ OK ] button of the "VFO
SET" window or press the computer's [ ENTER ] key to ter-
minate the frequency entry.
EFERENCE
N
AVIGATION ON THE
S
ET
E
NTRY
- 6 -
B
OOK
( VFO-B )
S B
UB AND
[ SUB VFO-B ] knob
Frequency Digit
"VFO SET" window
[ OK ] button
[ A/B ] button
[ B ] button
BAND keys
[ B ] button
[ ENT ] button