PCC-2000 R
O
PERATION OF
[ METER ] K
NOB
Click the left mouse button on the [ METER ] knob, then turn the
mouse scroll or press the left/right buttons to select the function
of the meter during transmission.
[ MIC ] K
NOB
Click the left mouse button on the [ MIC ] knob (the indication
color of "MIC" will turn yellow), then turn the mouse scroll or
press the left/right buttons to select the Microphone gain level.
[ RF PWR ] K
NOB
Click the left mouse button on the [ RF PWR ] knob (the indica-
tion color of "RF PWR" will turn yellow), then turn the mouse
scroll or press the left/right buttons to set the desired output power.
[ DIM ] B
UTTON
Click the left mouse button on the [ DIM ] button to toggle the
illumination level of the Meter/Display between "Hi" and "Low."
[ MOX ] B
UTTON
Click the left mouse button on the [ MOX ] button to engage trans-
mission. When the MOX circuit is set to on, the inside of the
button glows red.
[ SPOT ] B
UTTON
Click the left mouse button on the [ SPOT ] button to turn on the
CW receiver spotting tone.
[ A ] B
UTTON
When this button glows red, the following buttons are active on
the Main Band (VFO-A).
[ MODE ] Button
[ BAND ] Button
[ NAR ] Button
[ AGC ] Button
[ NB ] Button
[ NB ] Knob
[ B ] B
UTTON
Click the left mouse button on the [ B ] button to turn the button
orange for five seconds. When this button glows orange, the fol-
lowing buttons are active on the Sub Band (VFO-B).
[ MODE ] Button
[ BAND ] Button
[ NAR ] Button
[ AGC ] Button
[ NB ] Button
[ NB ] Knob
EFERENCE
M
K
ISCELLANEOUS
[ MIC ] knob
[ A ] button
- 18 -
B
OOK
B
NOBS AND
UTTONS
[ DIM ] button
[ MOX ] button
[ SPOT ] button
[ METER ] knob
[ RF PWR ] knob
[ B ] button