Advertisement
Quick Links
9/9/10
VERY IMPORTANT NOTICE:
This update procedure is for the FT-950 MAIN and EDSP software. The MAIN software is for all lot
numbers. The EDSP software is different. Please verify the version of the radio by the serial number.
The third and fourth digits indicate the lot number, example xx42xxxx. For lots 01 thru 42 proceed
with MAIN and EDSP software update. For lots xx43xxxx and above install the MAIN only, do not
install the EDSP software.
You may also verify the current EDSP level of your radio (The software versions can be displayed on
the radio, see the below instructions). If the first digit of the number is 2 (example 20.45 1.13) Do not
install this update EDSP software, It is not compatible with EDSP level 2 radios.
Radios with lot numbers 43 and above, cannot operate with EDSP Ver. 11.54 software.
time (7/12/2010) there are no updates for EDSP level 2 radios.
This procedure is used to update Main CPU Ver.
flash programming for the FT-950 Transceivers.
We recommend installing the Flash Programming Software on a PC computer with Windows 2000,
XP or Vista Operating System; and use the serial cable RS-232C, DB9F to DB9F straight cable.
NOTE: There are many USB adapters available; however some may not function with this software.
We recommend using the latest USB adapter driver software when available.
The software versions can be displayed on the radio
While holding the three buttons [GEN]＋[50]＋[ENT] turn the radio on. The software version will be
displayed in the VFO-A window for 5 seconds then the radio will start up in normal operation.
See below:
Example EDSP V11.53 and MAIN V1.12 software version.
EDSP:
Software version
11.XX
(This image & version is for
illustration only)
*If you already have E
DSP
the FT-950 again.
The software updates will work with all versions (AF, AS, EU, NA, OC, SA or all Countries) of the FT-950.
PEP950
V11.54 or V20.45,
and MAIN
0115
and EDSP Ver.
Main CPU:
Software version
(This image & version is for
illustration only)
it is not necessary to update
V0115
software versions,
At this
11.54
the
01XX
Advertisement
Related Manuals for Yaesu FT-950 PEP950 - UPDATE V0115 AND V11.54
Summary of Contents for Yaesu FT-950 PEP950 - UPDATE V0115 AND V11.54
- Page 1 9/9/10 VERY IMPORTANT NOTICE: This update procedure is for the FT-950 MAIN and EDSP software. The MAIN software is for all lot numbers. The EDSP software is different. Please verify the version of the radio by the serial number. The third and fourth digits indicate the lot number, example xx42xxxx. For lots 01 thru 42 proceed with MAIN and EDSP software update.
-
Page 2: Important Note
Please check your menu, update the settings, and then save the new settings to the CF card. Install the data file to PC 1. Down load the FT-950 data file [FT-950_PEP950_9-9-10.zip] from the following website: http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=292E 02F4E4D00EC99887A63E7B8ECD1B&DivisionID=65&isArchived=0 2. Save the FT-950 data file [FT-950_PEP950_9-9-10.zip] to the desktop on your computer. - Page 3 MAIN Software Update *Don't forget to write down (or save to a CF Card) any personal menu settings you have changed from the default before you start. Please see the DMU-2000 Data Management Operation Manual for the procedure to save your settings to a CF card. 1.
- Page 4 Turn the radio off. The main CPU updating process is now complete. Follow the instructions below to update the EDSP. EDSP Software Update This update procedure is only for the FT-950 lot numbers 01 to 42. Radios lot numbers 43 and above, cannot operate with this update EDSP software.
- Page 5 EDSP and the Main CPU, you may wish to make new settings. We hope this new software will increase your enjoyment of your FT-950. Thank you for choosing Yaesu radios. If you have any problems or questions please contact Vertex Standard, amateurtech@vxstdusa.com...