If Shift Operation; Width Operation; Notch Operation; Auto Notch Operation - Yaesu PCC-2000 Reference Book

PCC-2000 R
Click the left mouse button on the edge of the [ SHIFT ] knob (the
indication color of "SHIFT" will turn yellow), then turn the mouse
scroll or press the left/right buttons to move the filter passband.
Click the left mouse button on the edge of the [ WIDTH ] knob
(the indication color of "WIDTH" will turn yellow), then turn
the mouse scroll or press the left/right buttons to adjust the filter
bandwidth.
1. Click the left mouse button on the [ NOTCH ] button to turn
the Notch filter on and off. When the Notch filter is set to on,
the Notch characteristic will appear in the display.
2. Click the left mouse button on the edge of the [ COARSE ]
knob (the indication color of "COARSE" will turn yellow),
then turn the mouse scroll or press the left/right buttons to
perform coarse adjustment of the center frequency of the IF
Notch filter.
3. Click the left mouse button on the edge of the [ FINE ] knob
(the indication color of "FINE" will turn yellow), then turn
the mouse scroll or press the left/right buttons to make fine
adjustments to the center frequency of the IF Notch filter.
Click the left mouse button on the [ DNF ] button to turn the Auto
Notch filter on and off. When the Auto Notch filter is set to on,
the "DNF" icon will appear in the display.
1. Click the left mouse button on the [ DNR ] button to turn the
Digital Noise Reduction system on and off. When the Digital
Noise Reduction system is set to on, the "DNR" icon will
appear in the display.
2. Click the left mouse button on the edge of the [ DNR ] knob
(the font color of "DNR" will change to yellow), then turn
the mouse scroll or press the left/right buttons to select the
setting that most effectively reduces the noise level.
EFERENCE
IF SHIFT O
WIDTH O
PERATION
NOTCH O
PERATION
AUTO NOTCH O
N R
OISE EDUCTION
- 10 -
B
OOK
PERATION
[ NOTCH ] button
NOTCH [ COARSE ] knob
PERATION
O
PERATION
[ DNR ] button
[ SHIFT ] knob
[ WIDTH ] knob
NOTCH [ FINE ] knob
[ DNF ] button