Recording Own Voice In Memory; Checking Recording; Transmitting Recorded Message; Voice Memory Operation From The Optional Fh-2 Remote Control Keypad - Yaesu FT-950 Operating Manual

T
RANSMITTER
V M
OICE EMORY

Voice Memory Operation from the optional FH-2 Remote Control Keypad

You may also utilize the Voice Memory capability of the FT-950 from the optional FH-2 Remote Control Keypad, which
plugs into the rear panel's REM jack.
Recording Your Own Voice in Memory
1. Select the LSB, USB, AM, or FM mode using the front
panel [ MODE ] buttons.
2. Adjust the [ MIC GAIN ] knob, as described on page 56.
3. Press the [ MEM ] key on the FH-2. A blinking "
icon will appear in the display.
4. Press any of the FH-2's keys numbered [ 1 ] through
[ 5 ] to select that memory storage register.
A :
DVICE
If you do not press the PTT key (see next step) within
five seconds, the memory storage process will be can-
celled.
5. Press the microphone's PTT switch momentarily. The
" " icon will glow steadily and recording will
begin.
6. Speak into the microphone in a normal voice level to
record the message (such as "CQ DX, CQ DX, this is
W 6 Delta X-Ray Charlie, W 6 Delta X-Ray Charlie,
Over"). Remember that the time limit for recording
any message is 20 seconds.
7. Press the FH-2's [ MEM ] key to terminate the message
storage process.
FT-950 O
PERATING
( SSB/AM/FM
MODES
LOCK
ON OFF
LOCK
ON OFF
LOCK
ON OFF
M
ANUAL
C
ONVENIENCE
:
R
EQUIRES OPTIONAL
Checking Your Recording
1. Be sure that the front panel [ MOX ] button is "Off"
(the LED imbedded in the button must be off).
2. Press the FH-2's [ 1 ] ~ [ 5 ] key (whichever one you just
" recorded in). The "
play and you will hear the contents of the Voice Memory
you just recorded.
A :
DVICE
You may adjust the playback level of the recording via
Menu item "014 DVS RX LVL
014 DVS RX LVL 014 DVS RX LVL
014 DVS RX LVL". 014 DVS RX LVL
Transmitting the Recorded Message
1. Select the LSB, USB, AM, or FM mode using the front
panel [ MODE ] buttons.
2. Press the front panel [ BK-IN ] button. The "
icon will appear in the display.
3. Press the FH-2's [ 1 ] ~ [ 5 ] key (whichever one you just
recorded in). A "
play and the message will be transmitted.
A :
DVICE
You may adjust the transmit (audio) level of the recording
via Menu item "015 DVS TX LVL
015 DVS TX LVL 015 DVS TX LVL
015 DVS TX LVL". 015 DVS TX LVL
F
EATURES
DVS-6 V M
OICE EMORY
" icon will appear in the dis-
LOCK
ON OFF
" icon will appear in the dis-
LOCK
ON OFF
Page 65
)
U
NIT
"