Frequency Display - Yaesu FT-950 Operating Manual

D I
NDICATIONS ( R
ISPLAY
TX
This indicator appears during transmission.
BUSY
This indicator appears whenever the receiver squelch
is open. If this indicator is not showing, and reception
seems to have been lost on the receiver for no apparent
reason, check the position of the [ SQL ] knob and ro-
tate it fully counter-clockwise to restore reception.
FAST
This indicator appears when the Main Tuning Dial
knob's, tuning rate is set to "fast".
LOCK
This indicator appears when the Main Tuning Dial knob
is locked.
LSB, USB, CW, AM, FM, RTTY, PKT
Displays the current operating mode.

Frequency Display

This is the frequency display.
A :
DVICE
When setting the Menu items, the Menu item num-
ber, Menu group name, and Menu item name will
appear in this area during setup.
When setting the CTCSS frequency for Encoding
or Tone Squelch operation, the current tone infor-
mation will appear in this area during setup.
When controlling the optional rotator, the current
rotation speed will appear in this area during setup.
Page 26
)
S
IGHT IDE
Tuning Offset Indicator
This is a tuning scale that, as configured from the fac-
tory, provides a visual CW tuning indication of the in-
coming signal's offset from your transceiver's CW car-
rier frequency, as programmed by the relative clarifier
offset, or the peak position of the optional μ-TUNE
filter.
CLAR
This indicator appears whenever the Clarifier function
is activated.
MR
This indicator appears when the FT-950 is in the
Memory Recall mode.
MT
This indicator appears when the FT-950 is in the
Memory Tune mode to indicate that the memory con-
tents have been temporarily changed.
Multi-Display Window
This window displays either the Clarifier offset or the
Memory Channel Number.
A :
DVICE
During FM operation, the Repeater Shift will be
indicated in this window. A Negative frequency shift
will be indicated by "–" while a Positive frequency
shift will be indicated by "+".
When setting the Menu items, the current setting
will appear in this area.
When setting the CTCSS Tone Squelch Encoding,
the current repeater shift direction will appear in
this area.
When controlling the optional rotator, the antenna
direction will appear in this area during setup.
FT-950 O M
PERATING ANUAL