Standard Memory Operation; Memory Storage; Memory Channel Recall - Yaesu FT-950 Operating Manual

M O
EMORY
The Standard Memory of the FT-950 allows storage and recall of up to 99 memories, each storing frequency, mode, and a
wide variety of status information detailed previously. Memories may be grouped into as many as six Memory Groups, and
additionally you get nine pairs of band-limit (PMS) memories along with five QMB (Quick Memory Bank) memories.

Memory Storage

1. Set the VFO-A up with the frequency, mode, and sta-
tus, the way you want to have it stored.
2. Press the [ A M ] button momentarily (the current chan-
nel number will start blinking in the Multi-Panel Win-
dow); the contents of the current memory channel will
be shown on the frequency display field.
3. Rotate the [ CLAR/VFO-B ] knob to select the memory
channel onto which you wish to store the data. If you
have selected a channel on which data is already stored,
that frequency will appear on the display.
4. Press and hold in the [ A M ] button for one second to
store the frequency and other data into the selected
memory channel. A double beep will confirm that you
have held the [ A M ] button in long enough.

Memory Channel Recall

1. Press the [ V/M ] button, if necessary, to enter the
"Memory mode". A memory channel number will ap-
pear in the Multi-Panel Window.
A :
DVICE
If you cannot enter the "Memory mode", check the
[ VFO-B ( RX )] Indicator/Switch. If it is illuminated
green, press the [ VFO-A ( RX )] Indicator/Switch to
make the [ VFO-B ( RX )] Indicator/Switch go out, then
press the [ V/M ] button again.
2. Press the [ MCH ] button. The orange LED inside the
button will light up, indicating that you are ready to
recall a memory channel.
3. After pressing the [ MCH ] button, you may rotate the
[ CLAR/VFO-B ] knob to select the desired memory
channel.
A :
DVICE
To work within a particular Memory Group, press the
[ GRP ] button (the imbedded LED will glow orange), then
rotate the [ CLAR/VFO-B ] knob to select the desired
Memory Group. Now press the [ MCH ] button (the im-
bedded LED will glow orange); you may now choose the
memory channel within the selected Memory Group.
Page 92
PERATION
S M
TANDARD EMORY
O
PERATION
Multi-Display Window
[ VFO-A ( RX )] Button
FT-950 O
[ CLAR/VFO-B ] Knob
[ A M ] Button
[ VFO-B ( RX )] Button
[ GRP ] Button
[ V/M ] Button [ MCH ] Button
[ CLAR/VFO-B ] Knob
M
PERATING ANUAL