Transmitter Convenience Features; Voice Memory - Yaesu FT-950 Operating Manual

T
RANSMITTER
V M
OICE EMORY
You may utilize the Voice Memory capability of the FT-950 for repetitive messages. The Voice Memory system includes five
memories capable of storing up to 20 seconds of voice audio each. The maximum that any memory can hold is 20 seconds.
Recording Your Own Voice in Memory
1. Select the LSB, USB, AM, or FM mode using the front
panel [ MODE ] buttons.
2. Adjust the [ MIC GAIN ] knob, as described on page 56.
3. Press and hold the [ SELECT ] knob for one second to
activate the Voice Memory Unit. You will see one of
following indications in Multi-Display Window on the
display; "rEC1 "rEC1", "rEC2 rEC2", "rEC3
"rEC1 "rEC1 "rEC1 rEC2 rEC2 rEC2
"PLY1 PLY1", "PLY2 PLY2", "PLY3 PLY3", "PLY4
PLY1 PLY1 PLY1 PLY2 PLY2 PLY2 PLY3 PLY3 PLY3
4. Rotate the [ SELECT ] knob to recall the Voice Memory
Channel ("rEC1 rEC1" - "rEC5 rEC5") you
rEC1 rEC1 rEC1 rEC5 rEC5 rEC5
wish to record.
5. Press the [ SELECT ] knob momentarily. A blinking
" " icon will appear in the display.
6. Press the microphone's PTT switch momentarily. The
" " icon will glow steadily and recording will
begin. If you do not press the PTT switch within five
seconds of pressing the [ SELECT ] knob, the memory
storage process will be cancelled.
7. Speak into the microphone in a normal voice level to
record the message (such as "CQ DX, CQ DX, this is
W 6 Delta X-Ray Charlie, W 6 Delta X-Ray Charlie,
Over"). Remember that the time limit for recording
any message is 20 seconds.
8. Press the [ SELECT ] knob momentarily to terminate
the message storage process.
Checking Your Recording
1. Be sure that the front panel [ MOX ] button is "Off"
(the LED imbedded in the switch must be off.)
2. Press and hold the [ SELECT ] knob for one second to
activate the Voice Memory Unit. You will see one of
following indications in Multi-Display Window on the
display; "rEC1 "rEC1", "rEC2 rEC2", "rEC3
"rEC1 "rEC1 "rEC1 rEC2 rEC2 rEC2
"PLY1 PLY1", "PLY2 PLY2", "PLY3 PLY3", "PLY4
PLY1 PLY1 PLY1 PLY2 PLY2 PLY2 PLY3 PLY3 PLY3
3. Rotate the [ SELECT ] knob to recall the Voice Memory
Channel ("PLY1 PLY1" - "PLY5 PLY5") which-
PLY1 PLY1 PLY1 PLY5 PLY5 PLY5
ever one you just recorded in.
4. Press the [ SELECT ] knob. The "
pear in the display and you will hear the contents of
the Voice Memory you just recorded.
A :
DVICE
You may adjust the playback level of the recording via
Menu item "014 DVS RX LVL
014 DVS RX LVL 014 DVS RX LVL
014 DVS RX LVL 014 DVS RX LVL".
[ MOX ] Button
[ SELECT ] Knob
Page 64
C
ONVENIENCE
( SSB/AM/FM
MODES
rEC3", "rEC4 rEC4", "rEC5
rEC3 rEC3 rEC3 rEC4 rEC4 rEC4 rEC5 rEC5 rEC5 rEC5",
PLY4", or "PLY5
PLY4 PLY4 PLY4 PLY5 PLY5 PLY5". PLY5
rEC3", "rEC4 rEC4", "rEC5
rEC3 rEC3 rEC3 rEC4 rEC4 rEC4 rEC5 rEC5 rEC5 rEC5",
PLY4", or "PLY5
PLY4 PLY4 PLY4 PLY5 PLY5 PLY5". PLY5
" icon will ap-
Multi-Display Window
F
EATURES
:
R DVS-6 V
EQUIRES OPTIONAL
[ SELECT ] Knob
Transmitting the Recorded Message
1. Select the LSB, USB, AM, or FM mode using the front
panel [ MODE ] buttons.
2. Press the front panel's [ BK-IN ] button. The "
icon will appear in the display.
3. Press and hold the [ SELECT ] knob for one second to
activate the Voice Memory Unit. You will see one of
the following indications in the Multi-Display Window
on the display; "rEC1 "rEC1", "rEC2
"rEC1 "rEC1 "rEC1
"rEC5 rEC5", "PLY1 PLY1", "PLY2
rEC5 rEC5 rEC5 PLY1 PLY1 PLY1
"PLY5
PLY5 PLY5". PLY5
PLY5
4. Rotate the [ SELECT ] knob to recall the Voice Memory
Channel ("PLY1 PLY1" - "PLY5
PLY1 PLY1
PLY1
memory message you wish to trans-
mit.
5. Press the [ SELECT ] ] knob. A "
pear in the display and the message will be transmit-
ted.
A :
DVICE
You may adjust the transmit (audio) level of the recording
via Menu item "015 DVS TX LVL
015 DVS TX LVL". 015 DVS TX LVL 015 DVS TX LVL 015 DVS TX LVL
[ BK-IN ] Button
[ SELECT ] Knob
FT-950 O
M U
OICE EMORY NIT
[ MODE ] Button
Multi-Display Window
rEC2", "rEC3 rEC3", "rEC4
rEC2 rEC2 rEC2 rEC3 rEC3 rEC3 rEC4 rEC4 rEC4 rEC4",
PLY2", "PLY3 PLY3", "PLY4 PLY4", or
PLY2 PLY2 PLY2 PLY3 PLY3 PLY3 PLY4 PLY4 PLY4
PLY5"), depending on which
PLY5 PLY5
PLY5
" icon will ap-
Multi-Display Window
[ MODE ] Button
M
PERATING ANUAL
)
"