Operation; Before Operating; Turning The Power On; Selecting The Function - Denon CHR-F103 Operating Instructions Manual

ENGLISH

Operation

CD/HDD/USB/NET
ON/STANDBY <JOG DIAL>,
CD/HDD/USB/NET
SETUP
[TIME/DISPLAY]
MUSIC SEARCH
BACK
[ DIMMER ]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
MUSIC SEARCH

Before operating

< > SETUP
5

Turning the power on

ON/STANDBY
Press
• When the power turns on, the power indicator lights green.
¢ Turning the power off (to the standby mode):
Press < ON/STANDBY > again.
• The power indicator lights red while switching to the standby
BACK
mode.
ENTER
• The power indicator turns off once the standby mode is set.
NOTE:
ON/STANDBY
• When in the standby mode, a very small amount of power is
consumed, even if all the indicators are turned off.

Selecting the function

With the CHR-F103, it is possible to switch playback between three
sources: music discs, the HDD and an external source (USB audio,
network audio, etc.).
1
ENTER CD/HDD/USB/NET
Press
[ D H ]
source to be played.
BACK
CD
[ D H ]
2
Playback of the selected function starts.
ENTER
Listening to CD (
Listening to HDD (
[ NUMBER ]
Listening to USB/NETWORK (
(1~9, 0/10)
.
to select the function of the
HDD USB/NETWORK
page 23)
page 22)
page 26 ~ 29)
14
ENGLISH

Loading discs

1 < >
Press to open the disc tray.
5
2 Load a disc.
• When a CD is loaded, the album name, track name, etc., are
displayed automatically ( page 23).
• If there are multiple data entries in the Gracenote
corresponding to that CD, "Select CD Info" is displayed. Use < JOG
DIAL > or [ D D H H
] to select the entry to be display, then press ENTER.
• To change the displayed information, stop playback and press BACK.
NOTE:
• Playback of discs not conforming to CD standards (CDs with
copy control, for example), is not guaranteed.
• Do not press the disc tray in by hand when the power is turned
off. Doing so could damage the set.
• Do not insert foreign objects into the disc tray. Doing so could
damage the set.
®
database