Cd Synchronized Recording; Timer Playback Function; Edit Function - Denon CHR-F103 Operating Instructions Manual

CD synchronized recording

This function lets you easily record the tracks from a CD onto a
cassette tape.
For instructions, see the cassette deck's operating instructions.

Timer playback function

The receiver's timer function can be used to conduct playback at set
times.
For operating instructions, refer to the manual included with the
receiver.
• Switch the CHR-F103's function to the function you want to play
before setting the timer standby mode.

Edit function

Function : CD
This function lets you record onto cassette tapes with automatic
editing according to the length of the tape.
Load the CD and cassette tape before starting.
1
Turn on the power of the various components.
2
[MENU]
Press
• "EDIT" is displayed on the receiver's display.
3 [ ]
Use 9 to set the length of the cassette tape.
Example: To record onto a 60-minute cassette tape, use [
select "C-60".
C – 46
(The length of the cassette tape is the total length for sides A and B.)
• When the cassette tape length is set, the numbers of the tracks
and the total playing time for sides A and B respectively are
displayed.
4
< >
Press /
1 3
• Recording of the CD starts.
¢ Setting a specific cassette tape length:
When "C –" is displayed, use [NUMBER] (1 ~ 9, 0/10, +10) to input the
time.
Example: To set to 54 minutes
[+10] [+10] [+10] [+10] [+10] [4]
The length can be set to up to 150 minutes.
Function : CD
three times in a row.
] to
9
C – 60 C – 90 C –
Editing canceled
Tape Edit C – 46
Edit 01–06 A 20:26
Edit 07–09 B 11:23
[CD ]
or / .
1 3
33
ENGLISH
¢ Canceling the editing function:
or < TAPE > .
Press
2 2
NOTE:
• The editing function does not work with discs containing 26
tracks or more.
• When using the edited recording function, be sure to load the
cassette tape with side A facing upwards. The beginning of the
cassette tape is found automatically before recording starts.
• When using a tape that is already recorded on, erase the tape
before conducting edited recording.
• When using the edited recording function, set the cassette
deck's reverse mode to " ".
• In some cases it may not be possible to record all the tracks on
the cassette tape even if its length is longer than the total length
of the tracks on the disc, due to the fact that the tracks must be
divided between sides A and B. "OVER" is displayed on the
CHR-F103's display if there are tracks that cannot be recorded. If
"OVER" is displayed, change the length of the cassette tape as
3
described in step .
• When the editing function is in use, no buttons other than
ON/STANDBY, [MENU], [ ], [CD /
9 1 3
[TIME/DISPLAY] will operate.
• Edited recording is not possible with discs containing files in MP3
or WMA format.
ENGLISH
, < TAPE > and
],
2 2