Inputting The Computer's Language (Pc Language); Updating The Cddb (Cddb Update) - Denon CHR-F103 Operating Instructions Manual

ENGLISH
CD STORE
ON/STANDBY
2
CD STORE
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Inputting the computer's language
< >
5 2 (PC Language)
If you wish to display the character data from the computer used as
the music server in English, use this procedure to input the language
used on the computer. Normally the characters are displayed in the
same language as used on the computer so there is no need to
change this setting. Only change it if the character data from the
computer is not displayed properly on the CHR-F103.
1
From the "Others" mode, select "PC Language" then
<JOG DIAL>, ENTER
press
ENTER
2 < JOG DIAL >
Use
3
ON/STANDBY ENTER
Press
ENTER
[ D H F G H F G ]
ENTER
[ D H F G H F G ]
.
[D D H H ]
or to select.
.
18
ENGLISH

Updating the CDDB (CDDB Update)

• Use this procedure to update the Gracenote
stored in the CHR-F103.
• An update disc (available for a charge) is required for this update. For
details, contact a DENON customer inquiry center.
1
From the "Others" mode, select "CDDB Update"
ENTER
then press .
2
From the "CDDB Update" mode, use
ENTER
"Yes", then press .
• The disc tray opens.
3
Load the update disc.
• The tray closes and updating of the CDDB data begins.
("Updating the Gracenote Database..." flashes.)
• Once updating is completed, "Complete" is displayed and the
disc tray opens.
4 <
Remove the update disc, press 5
ON/STANDBY
then press to turn off the power.
• Updating is completed.
®
database (CDDB)
[D D H H ]
to select
>
to close the tray,