Tips And Troubleshooting - CONCORD DUO User Manual

Tips and troubleshooting

SYMPTOM
POWER
Can't turn on the
camera.
TAKING PICTURES
Picture taken is
poor quality
POSSIBLE
CAUSE
Batteries were not
installed correctly.
Batteries are dead or
weak.
Battery compartment
was not closed correctly.
Poor lighting.
Lens is dirty.
Subject is too close.
Subject or camera
moved as picture was
taken.
24
POSSIBLE
SOLUTION
Install batteries correctly
using the direction
indicators on the inside of
the battery cover.
Replace batteries.
Close the battery
compartment properly.
Take picture in better
lighting and/or use the
flash at a reasonable
distance.
Clean lens with a soft
cloth. See the Camera
maintenance section.
Stand at least 3ft. away
from the subject.
Hold camera steady until
picture is taken.