Netware Server/Client (Except Ndps); Netware Server/Client (Ndps) - Konica Minolta bizhub 181 User Manual

2

NetWare server/client (except NDPS)

1
Connect the network cable. (Refer to "Connecting to a local area net-
work (LAN)" on page 1-12.)
2
Specify the necessary settings for connecting this machine to a Net-
Ware server. (Refer to "Connecting the computer and this machine
over a network" on page 2-15.)
3
Specify the necessary settings for printing through a NetWare server
from a NetWare client. (Refer to "Connecting the computer and this
machine over a network" on page 2-15.)

NetWare server/client (NDPS)

1
Connect the network cable. (Refer to "Connecting to a local area net-
work (LAN)" on page 1-12.)
2
From the machine's control panel, specify the IP address, subnet mask
and default gateway. (Refer to "Specifying an IP address" on page 2-9.)
3
Print the settings information, and then check the settings. (Refer to
"Printing the settings information" on page 2-13.)
– If optional fax kit FK-506 and image controller IC-206 are not in-
stalled, the settings information cannot be printed from the ma-
chine's control panel.
4
Specify the necessary settings for connecting this machine to a Net-
Ware server. (Refer to "Connecting the computer and this machine
over a network" on page 2-15.)
5
Specify the necessary settings for printing through a NetWare server
from a NetWare client. (Refer to "Connecting the computer and this
machine over a network" on page 2-15.)
2-8
Network printing
NC-503