Copying A Photograph; Using The Default Settings To Copy A Photograph - Kodak 1079094 Extended User Manual

Copying

Copying a photograph

Using the default settings to copy a photograph

44
You can copy a photograph using the default settings, or you can make adjustments
to the quantity, size, quality, and brightness of your copies. When you copy a
photograph, the printer will use paper from the top paper tray, unless you specify
otherwise.
The default settings are either the factory default settings
defaults, page 67), or defaults that you have set on the printer
page 46).
To copy a photograph using the current default settings:
1. Lift the scanner lid, and place the photograph face down in the right-front corner
of the scanner glass.
2. Close the lid.
3. Press Home .
4. Press to select Copy Photo .
5. Press Start to begin copying.
www.kodak.com/go/aiosupport
(see Resetting factory
(see Save as Defaults,