Copying a photograph
Using the default settings to copy a photograph
You can copy a photograph using the default settings, or you can adjust the quantity,
size, quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page
49), or defaults that you have set on the printer (see Save as Defaults
at the bottom of the table under
page
30).
To copy a photograph using the current default settings:
1. Lift the scanner lid, and place the photograph face down in the right-front corner
of the scanner glass.
2. Close the lid.
3. Press Home.
4. Press
to select Copy Photo.
5. Press Start to begin copying.
www.kodak.com/go/aiosupport
KODAK ESP 5200 Series All-in-One Printer
Adjusting the settings and copying a photograph,
Resetting factory
29