Reverb; Volume - DigiTech RP 2000 User Manual

Section Three - Effects and Parameters
Sets the time interval between repeats.The available delay time ranges are 10 milliseconds (1/100 of a sec-
ond) to 3.0 seconds.
Controls the number of repeats for the Delay. Ranges from 0 to 99, and rphold (infinite repeats).The
Feedback Parameter is not available with the Reverse Delay.

Reverb

Ambience, or reverberation, is produced when sound energy is reflected off room surfaces and objects.
Using reverb in recorded program material gives the listener a sense that the material is being performed
in an actual room or hall. It is this similarity to actual acoustic spaces that makes reverberation a useful
tool in recorded music. Reverb Parameters and their functions are as follows:
This Parameter turns the Reverb on and off.
Allows you to choose the simulated ambience or environment you want to use.There are ten available
type selections:
Controls the amount of reverb signal to be mixed in with the dry signal. Ranges from 0 to 99.
The amount of time it takes for the Reverb to fade to inaudibility. Ranges from 1 to 10.
Preset Level
The RP2000's Preset Level controls the overall volume of the selected Preset. The level can be controlled
with the Expression Pedal for balancing levels in real-time during live performance. It is also useful to
lower the overall digital effects level if clipping occurs.The Preset Level is accessed by using the Reverb
button, and is variable from 0 to 99.
CLub=Club
Studio=Studio
bAthrm=Bathroom
pLate=Plate
Stage=Sound Stage
Garage=Garage
HALL=Hall
Church=Church
ArEna=Arena
SPring=Spring
RP2000 User's Guide