DigiTech RP 2000 User Manual page 7

Section One - Introduction
6. Mode Buttons- These 6 buttons are used to select various modes in which the RP2000 will function.The top three
buttons perform single functions while the bottom three buttons perform dual functions based
upon the current operation of the RP2000.The buttons are labeled as follows:
A) FX Mode - The FX Mode button selects whether the 1-4 footswitches will recall Presets within the
selected Bank, or act as on/off switches for the individual effects in the currently active Preset.
The FX Mode button will light when the switches are performing effects on/off functions.
B) Edit/Exit - This button will take the RP2000 in and out of the edit mode.The LED will light while you are
in Edit mode.This button can also be used to escape from any mode or level of editing.
C) Rhythm - The Rhythm button is used to access the drum loop feature in the RP2000.When the Rhythm
feature is selected, the LED will light and the bottom row of Mode buttons are used to edit
various functions in Rhythm mode.
D) Store - The Store button is used to save your custom edits to the user Presets.The function of this button
changes to select Pattern in Rhythm mode.
E) Utility - The Utility button provides access to several global functions including MIDI Channel, and Sysex
dumps.The function of this button changes to select Tempo in Rhythm mode.
F) Assign - This button is used to assign a parameter to the Control footswitch, the Expression Pedal, or
internal LFOs.The function of this button changes to select Level in Rhythm mode.
7. Bank/Control Switches - The Bank switch is used to change the RP2000's Banks. If FX Mode is selected, it changes
8. Expression Pedal - The Expression Pedal is used for real time control of parameters during performance. For
Example, this pedal may control Volume in one Preset,Wah in another Preset, or control the
Delay Level in yet another Preset. Individual boundaries may be set up for the minimum and
maximum parameter values that are controlled by the Expression Pedal.The RP2000's exclusive
V-Switch feature allows you to change functions of the Expression Pedal by applying extra
pressure on the toe of the Pedal. See page 29 for more on making expression pedal assignments.
Presets.The Control switch can have a variety of functions assigned to it. Press these 2
footswitches simultaneously to access the Learn-A-Lick function, or individually to adjust
the Learn-A-Lick playback tempo.
RP2000 User's Guide