Section Four - Tutorial
Select the Green Channel Amp Model
We wanted our green channel's Amp Model to produce the sound of a Tweed Amp. Press the Amp Model button and if
necessary, rotate the Data Wheel until the Display reads Green. Press the Amp Model button again which will take us
to the Amp Type Parameter for the Green channel. Rotate the Data Wheel until the Display shows tweed as the type.
Adjust the Green Channel's Gain, Level, and Cabinet Emulator
The Gain of the Green channel can be set to provide the drive that we want in our Tweed Amp Model. Press the Amp
Model button again and this will take us to the Gain Parameter of the Green channel. Rotate the Data Wheel to set
the Gain to 65.
In order to balance the volume Levels of the Green channel's Tweed, and the Red Channel's Rectified Amp Models, we
will need to set the Green Channel relatively high to match the volume of the high gain Rectified model. Press the Amp
Model button again to access the Amp Level Parameter.Then rotate the Data Wheel to set the Level to about 1.
To help warm up the sound of our Tweed Amp Model, lets select the warm setting for the Cabinet Emulator. Press the
Amp Model button again to access the Cabinet Type Parameter. Rotate the Data Wheel until Warm is Displayed.
RP2000 User's Guide