Auto Record Mode - DigiTech JAMMAN Manual

Auto Record Mode

The aUTO REC (auto record) button starts recording when you start playing.
Press this button on an empty track (you can't auto-record on an existing
track) and the button lights. Now when you press the REC/PLaY/OVERDUb
footswitch, the JamMan® is armed for recording but won't start recording
until you start playing (the RECORD LED will flash to show that the JamMan
is armed). The JamMan monitors the input level and starts the recording
when it detects an audio signal.
If you've tapped in a tempo, the rhythm guide track playback will restart
at the beginning of recording. If not, the rhythm guide track playback will
begin when you finish recording and begin loop playback. Once recording
starts, the aUTO REC LED will turn off.
Changing the loop number while aUTO REC is active will preserve the aUTO
REC state on empty loops (the LED will turn off when an existing loop is
selected).
To turn off Auto Record, press the aUTO REC button until its LED is off.
24