Bypass Modes
There are two selectable Bypass Modes available in the Whammy DT, they are:
• True Bypass
• DSP Bypass
True Bypass Mode
From the factory, the Whammy DT is set to True Bypass Mode. In this mode, the circuitry in the
Whammy DT is completely bypassed when both Whammy and Drop Tune e ects are o . If you have
switched to DSP Bypass Mode and would like to switch back to True Bypass Mode, follow these steps:
1. Start with the power supply disconnected from the Whammy DT.
2. Press and hold the
MOMENTARY Footswitch
3. When the
DROP TUNE Effect LED
.
Footswitch
True bypass will now be re-enabled.
and apply power.
ashes red two times, release the
MOMENTARY