Advertisement
5.Type Knob
Selects 1 of the 7 different phaser effect types.
1-STAGE A
- A 4 stage phase shifter.
2-STAGE B
- An 8 stage phase shifter.
3-STAGE C
- A 12 stage phase shifter.
4-RISE / FALL
- Creates a constant rising phaser sound when the
REGEN
knob is set between the minimum and 12 o'clock positions,
or a constant falling phaser sound when the
between the 12 o'clock and maximum positions.
5-TRIG UP*
- The phaser effect starts at the bottom of its sweep
when the trigger threshold is reached. Use the
adjust the trigger threshold sensitivity and
sweep rate. Regeneration is fixed when Triggered Up is selected.
6-TRIG DOWN*
when the trigger threshold is reached. Use the
adjust the trigger threshold sensitivity and
sweep rate. Regeneration is fixed when Triggered Down is selected.
7-STEP
- Creates a random square wave phase effect similar to a
sample and hold filter on a synthesizer.
* Using a distortion pedal before the Hyper Phase may cause
inconsistent triggering due to the non-dynamic nature of distorted
signals.
- The phaser effect starts at the top of its sweep
REGEN
knob is set
REGEN
knob to
SPEED
knob to adjust
REGEN
knob to
SPEED
knob to adjust
Advertisement
