Advanced (Recording pictures)
If picture noise becomes a problem, we recommend that you take pictures after lowering the
•
maximum ISO sensitivity level, increasing the setting for [NOISE REDUCTION] under
[PICT.ADJ.], or lowering the setting for each of the items other than [NOISE REDUCTION].
(P90)
For details on [REC] mode menu settings, refer to P22.
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
Applicable modes:
[AUTO]/[200]/[400]/[800]/[1600]
Note
The upper limit of the ISO sensitivity can be set.
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
•
amount of picture noise.
It will work when the [SENSITIVITY] is set to [AUTO] or [INTELLIGENT ISO] is set to [ON].
•
For details on [REC] mode menu settings, refer to P22.
In sunlight, under incandescent lights or in other such conditions where the color of white
takes on a reddish or bluish tinge, this item adjusts to the color of white which is closest to
what is seen by the eye in accordance with the light source.
Applicable modes:
[AWB]: Automatic adjustment
[V]:
When taking pictures outdoors under a clear sky
[Ð]:
When taking pictures outdoors under a cloudy sky
[î]:
When taking pictures outdoors in the shade
¢
[
]
:
When taking pictures with the flash only
[Ñ]:
When taking pictures under incandescent lights
[
]:
1
When
[
]:
2
[
]:
When using the preset color temperature setting
¢ It cannot be selected in the motion picture mode.
Note
The optimal white balance will differ depending on the type of halogen lighting being recorded
•
under so use [AWB], [
The white balance might not be adjusted for the subject where the flash does not reach when
•
the flash is used.
The white balance is memorized even if the camera is turned off, but [WHITE BALANCE] for
•
the advanced scene mode or the scene mode is set to [AWB] when the advanced scene mode
or the scene mode is changed.
82
VQT1S36
³±´²
= [WHITE BALANCE]
using the preset white balance
] or [
].
1
2
[ISO LIMIT SET]