Connecting to other equipment
Press 3 to select [PRINT START] and then press
[MENU/SET].
•
Refer to
print the pictures.
•
Press [MENU/SET] to cancel printing.
•
Disconnect the USB connection cable after printing.
Select and set the items both on the screen in step
"Selecting a single picture and printing it" and in step
"Selecting multiple pictures and printing them" procedures.
•
When you want to print pictures in a paper size or a layout which is not
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [{]
and then set the paper size or the layout on the printer. (For details,
refer to the operating instructions of the printer.)
•
When [DPOF PICTURE] has been selected, the [PRINT WITH DATE]
and [NUM. OF PRINTS] items are not displayed.
Item
[OFF]
[ON]
•
If the printer does not support date printing, the date cannot be printed on the picture.
•
Since the printer's settings may take precedence over the print with date setting, check the
printer's print with date setting as well.
Note
When asking the photo shop to print the pictures
•
By stamping the date using [TEXT STAMP]
[DPOF PRINT]
photo shop.
You can set the number of prints up to 999.
Item
{
[L/3.5qk5q]
[2L/5qk7q]
[POSTCARD]
[16:9]
[A4]
116
VQT1S36
P116
for the items which can be set before starting to
[PRINT WITH DATE]
Date is not printed.
Date is printed.
(P108)
setting before going to a photo shop, the dates can be printed at the
Settings on the printer are prioritized.
89 mmk127 mm
127 mmk178 mm
100 mmk148 mm
101.6 mmk180.6 mm
210 mmk297 mm
Print Settings
Description of settings
(P101)
or setting date printing at the time of the
[NUM. OF PRINTS]
[PAPER SIZE]
Description of settings
2
of the
3
of the