Registering Personal Menu Settings (Registering Custom Settings) - Panasonic Lumix DMC-FZ28 Operating Instructions Manual

∫ Technique for Manual focus
1 Focus by tilting the joystick toward 3/4.
2 Tilt it a little more in the same direction.
3 Tilt the joystick in the opposite direction to
finely focus on the subject.
∫ Prefocus
This is a technique for focusing in advance on the point the pictures will be taken when it is difficult to
focus on the subject with auto focus due to its quick motion. (e.g. [PANNING]
This function is suitable when the distance between the camera and the subject is certain.
∫ One shot AF
You can focus on the subject with auto focus by selecting [MF] with [AF/MF] button and
then pressing [AF#/FOCUS] switch button.
This is convenient for prefocus.
Note
•
You can also use manual focus while in motion picture mode, but the focus cannot be adjusted
during recording.
•
If you focus on the subject in Wide and then rotate the zoom lever to Tele, the focus may not be
adequate. In this case, focus on the subject again.
•
The MF assistance does not appear when using the digital zoom.
•
The distance to the subject displayed on the screen in manual focus is an approximation of the
focus position. Use the MF assistance screen for a final check of the focus.
•
After canceling power save mode, focus on the subject again.
[REC] mode:
Registering Personal Menu Settings
custom settings)
It is possible to register up to 4 sets of current camera settings as custom sets.
• Set to the mode dial to the desired mode and select the desired menu settings in advance.
Select [CUST. SET MEM.] on the [SETUP] menu.
Press 3/4 to select the custom set to register and
then press [MENU/SET].
•
The custom settings registered in [
[ ] of the mode dial. It will be convenient if the custom setting
used often is registered, since it can be used by just setting the
mode dial.
] can be used with the
Advanced (Recording pictures)
(P70) in scene mode)
(Registering
(P22)
VQT1S36
61