Advanced (Recording pictures)
When a subject is close to the camera, the effective focus range is significantly narrowed.
•
Therefore, if the distance between the camera and the subject is changed after focusing on the
subject, it may become difficult to focus on it again.
AF macro mode gives priority to a subject close to the camera, so if the distance between the
•
camera and the subject is more than 2 m (6.57 feet), it takes longer to focus.
When you take pictures at close range, the resolution of the periphery of the picture may
•
decrease slightly. This is not a malfunction.
If the lens becomes dirty with fingerprints or dust, the lens may not be able to focus on the
•
subject correctly.
[REC] mode:
Taking Pictures with the Self-timer
Press 2 [ë].
Press 3/4 to select a mode.
You can also press 2 [ë] to select.
•
If you set [10S/3PICTURES], after 10 seconds the
•
camera takes 3 pictures at about 2 second intervals.
Press [MENU/SET].
You can also press the shutter button halfway to finish.
•
The menu screen disappears after about 5 seconds. At this time, the selected item is
•
automatically set.
Press the shutter button halfway to focus
and then press it fully to take the picture.
The self-timer indicator A blinks and the shutter is
•
activated after 10 seconds (or 2 seconds).
If you press [MENU/SET] while the self-timer is set, the
•
self-timer setting is canceled.
When [10S/3PICTURES] is selected, the self-timer
•
indicator blinks again after the first and the second
pictures are taken and the shutter is activated
2 seconds after it blinks.
Note
When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the
•
jitter caused by pressing the shutter button.
When you press the shutter button once fully, the subject is automatically focused just before
•
recording. In dark places, the self-timer indicator will blink and then may turn on brightly
operating as an AF assist lamp
We recommend using a tripod when recording with the self-timer.
•
The number of pictures which can be taken in burst mode is fixed to 3.
•
The number of pictures which can be taken in [FLASH BURST]
•
52
VQT1S36
(P91)
to allow the camera to focus on the subject.
(P70)
is fixed to 5.
A