Compensating The Exposure - Panasonic Lumix DMC-FZ28 Operating Instructions Manual

•
Depending on the recording conditions, the recording interval may become more than
2 seconds when [10S/3PICTURES] is selected.
•
The flash output may not be constant when [10S/3PICTURES] is selected.
•
[10S/3PICTURES] cannot be set when auto bracket or color bracket is set, or when the scene
mode [FLASH BURST] is set.
•
Self-timer cannot be set to 2 seconds or [10S/3PICTURES] in Intelligent auto mode.
•
Self-timer cannot be used while in [HI-SPEED BURST] in scene mode.
•
You cannot use the following functions when [10S/3PICTURES] is selected.
–
Burst mode
– [AUDIO REC.]
[REC] mode:

Compensating the Exposure

Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
Under exposed
Compensate the exposure
towards positive.
Press 3 [È] until [EXPOSURE] appears,
compensate the exposure with 2/1.
•
Select [0 EV] to return to the original exposure.
Press [MENU/SET] to finish.
• You can also press the shutter button halfway to finish.
∫ Operate with the joystick
Tilt the joystick toward 2 to select [È], and then move
3/4 to compensate the exposure.
A Exposure compensation value
•
Select [È] only to return to the original exposure (0 EV).
•
Press the shutter button halfway to finish.
Note
•
EV is an abbreviation of [Exposure Value]. It refers to the amount of light
given to the CCD by the aperture value and the shutter speed.
•
The exposure compensation value appears on the lower left of the screen.
•
The set exposure value is memorized even if the camera is turned off.
• The compensation range of the exposure will be limited depending on the brightness of the
subject.
Properly
exposed
Compensate the exposure
towards negative.
Advanced (Recording pictures)
Overexposed
VQT1S36
53