[Intelligent Iso]; [Sensitivity] - Panasonic Lumix DMC-FZ28 Operating Instructions Manual

[X]
Note
•
The ends of the recorded pictures may be cut at printing so check before printing.
For details on [REC] mode menu settings, refer to P22.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
[OFF]/[ON]
Note
•
Refer to P49 for the flash range.
•
Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
•
Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
•
The maximum ISO sensitivity will be set to the value set in [ISO LIMIT SET] when set to [ON].
When the [ISO LIMIT SET] is set to [AUTO], it will be set automatically within the range up to
[ISO800] depending on the brightness.
For details on [REC] mode menu settings, refer to P22.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Applicable modes:
[AUTO]/[100]/[200]/[400]/[800]/[1600]
ISO sensitivity
Recording location
(recommended)
Shutter speed
Noise
Note
• When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of value set
with [ISO LIMIT SET].
•
ISO sensitivity will adjust automatically depending on brightness within the maximum setting of
[ISO400] ([ISO800] when the flash is used) when [AUTO] is selected for [ISO LIMIT SET].
•
The setting is not available when [INTELLIGENT ISO] is being used. ([

[INTELLIGENT ISO]

³±
> [SENSITIVITY]
³±´²
When it is light (outdoors)
[Y]
100
Slow
Less
Advanced (Recording pictures)
[W]
(P139)
1600
When it is dark
Fast
Increased
] is displayed.)
VQT1S36
81