Device Administration - D-Link DIR-600 - Wireless N 150 Home Router User Manual

Section 3 - Configuration
This window will allow you to change the Administrator password. You can also enable Remote Management.
Administrator
Enter a new Login Name for the Administrator account.
Login Name:
Administrator
Enter a new password for the Administrator Login Name
Password:
and then retype the new password in the Confirm Password
textbox. The administrator can make changes to the
settings.
Remote management allows the DIR-600 to be configured
Enable Remote
Management: from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator
tasks. This feature enables you to perform Administrator
tasks from the remote (Internet) host.
IP Allowed to
The Internet IP address of the computer that has access to
Access:
the Broadband Router. If you input an asterisk (*) into this
field, then any computer will be able to access the Router. Putting an asterisk (*) into this field would present a security risk
and is not recommended.
Port:
The port number used to access the DIR-600. For example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of
the DIR-600 and 8080 is the port used for the Web-Management interface.
D-Link DIR-600 User Manual

Device Administration

43