Device Administration - D-Link DIR-615 User Manual

Section 3 - Configuration
This window will allow you to change the Administrator password. You can also enable Remote Management.
Administrator
Enter a New Password for the administrator login name and
Password:
then retype the new password in the Confirm Password
textbox. The administrator can make changes to the
settings.
Enable Remote Remote management allows the DIR-615 to be configured
Management:
from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator
tasks. This feature enables you to perform Administrator
tasks from the remote (Internet) host.
IP Allowed to
The Internet IP address of the computer that has access to
Access:
the Broadband Router. If you leave this field blank or type
0.0.0.0, then any computer will be able to access the Router.
This would present a security risk and is not recommended.
HTTP Port: The port number used to access the DIR-615. For example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of
the DIR-615 and 8080 is the port used for the Web-Management interface.
HTTPS Port: The port number used to access the DIR-615. For example: https://x.x.x.x:443 whereas x.x.x.x is the WAN IP address of
the DIR-615 and 443 is the port used for the Web-Management interface.
D-Link DIR-615 User Manual

Device Administration

39