D-Link DIR-600 - Wireless N 150 Home Router User Manual page 30

Section 3 - Configuration
1. To enable WPA/WPA2 for a RADIUS server, next
to Security Mode, selec or Enable WPA/WPA2
Wireless Security (enhanced).
2. Next to Cipher Type, select TKIP, AES, or
Auto.
3. Next to PSK/EAP, select EAP.
4. Next to RADIUS Server 1 enter the IP Address
of your RADIUS server.
5. Next to Port, enter the port you are using with your
RADIUS server. 1812 is the default port.
6. Next to Shared Secret, enter the security key.
7. If you have a secondary RADIUS server, enter its
IP address, port, and secret key.
8. Click Save Settings to save your settings.
D-Link DIR-600 User Manual 30