Device Administration - D-Link DIR-400 User Manual

Section 3 - Configuration
This window will allow you to change the Administrator password. You can also enable Remote Management from this
screen.
Administrator Enter a new Login Name for the Administrator
Login Name: account. The default Login Name is admin.
Note that the Login Name is case-sensitive,
e.g. admin would be a different Login Name
than Admin.
Administrator Enter a new password for the Administrator Login
Password: Name and then retype the new password in the
Confirm Password textbox. The administrator
can make changes to the settings.
Enable Remote
Remote management allows the DIR-400
Management:
to be configured from the Internet through a
web browser. The Administrator Login Name
and Password are still required to access the
web management interface. Normally, only a
member of your network can browse the built-
in web pages to perform Administrator tasks. This feature enables you to perform Administrator tasks from a remote
(Internet) host.
IP Allowed to The Internet IP address of the computer that has access to the router. If you input an asterisk (*) into this field, then any
Access: computer will be able to access the router. Putting an asterisk (*) into this field would present a security risk and is not
recommended.
Port: The port number used to access the DIR-400. For example: http://x.x.x.x:8080, where x.x.x.x is the WAN IP address of
the DIR-400 and 8080 is the port used for the web management interface.
D-Link DIR-400 User Manual

Device Administration

54