Static (Assigned By Isp) - D-Link DIR-600 - Wireless N 150 Home Router User Manual

Section 3 - Configuration
Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,
gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP
form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
ISP Gateway
Enter the Gateway assigned by your ISP.
Address:
MAC Address:
The default MAC Address is set to the WAN's physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP.
Clone MAC
The default MAC address is set to the WAN's physical
Address:
interface MAC address on the Broadband Router. You
can use the Clone MAC Address button to copy the MAC
address of the Ethernet Card installed by your ISP and
replace the WAN MAC address with the MAC address of the
router. It is not recommended that you change the default
MAC address unless required by your ISP.
Primary DNS
Enter the Primary DNS server IP address assigned by your
Address:
ISP.
Secondary DNS This is optional.
Address:
MTU:
Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1492
is the default MTU.
D-Link DIR-600 User Manual
Internet Setup

Static (assigned by ISP)

19